Blog

How many words is a 60-second voiceover script? About 150

1 October 2026 · updated 16 November 2026

About 150 words. Most voiceovers are read at 140 to 160 words a minute, so a 60-second script is 140 to 160 words. Write about 130 if the read is slow and warm or has pauses for pictures, and up to 170 for a brisk advert. Anything over 180 will sound rushed.

How many words for 15, 30, 60, 90 and 120 seconds?

Length Words (normal pace, ~150 a minute) Slow read Brisk advert
15 seconds 35–40 30 45
30 seconds 70–80 65 85
60 seconds 140–160 130 170
90 seconds 210–240 195 255
2 minutes 280–320 260 340

The rule of thumb behind the table: two and a half words a second. Divide your word count by 2.5 and you have the running time in seconds.

What we measured on our own voiceovers

We voice our own short films with a synthetic British voice, and the timings sit right on that rule:

  • A 58-word script ran 21.3 seconds.
  • An 88-word script ran 33.8 seconds.
  • A 309-word, twelve-scene tour ran 113.5 seconds, including the short pauses between scenes.

That is 156 to 178 words a minute across six films, about 165 on average. A human narrator who breathes, smiles and lets a line land is usually a little slower, which is why 150 is the safer planning figure.

Why does the same word count come out at different lengths?

  • Long words and numbers. "£1,250" is four or five spoken words, not one. Write numbers out the way they will be said before you count.
  • Pauses. Every full stop, list or scene change adds a beat. Pictures that need time on screen need gaps in the script.
  • Tone. Calm, premium or explainer reads are slower. Retail adverts and social clips are faster.
  • Names and jargon. Unfamiliar words slow any reader down, human or synthetic.

How do I check my script before it is recorded?

  1. Count the words (any word processor shows it).
  2. Divide by 2.5 for the running time in seconds.
  3. Read it aloud once against a stopwatch, at the pace you want. This catches the numbers and names that the count misses.
  4. Over time? Cut whole sentences rather than squeezing words; a rushed read sounds worse than a shorter script.

Frequently asked questions

Is 200 words too many for a 60-second voiceover?

Yes for most uses. At 200 words the reader must go at 200 words a minute, which sounds hurried. Cut to 150–170, or allow 80 seconds.

How long is a 300-word voiceover?

About two minutes at a normal pace (300 ÷ 2.5 = 120 seconds), a little under for a brisk read.

Do AI voices read faster than people?

Usually slightly. Our own synthetic voice averaged about 165 words a minute with pauses. Most AI voice tools let you set the speed, so plan at 150 and adjust.

What is the minimum for a 60-second slot?

Around 120 words. Below that the read drags unless the pictures carry the gaps.

Related on B.A.I.S.


Need this done for you? AI voiceover, British or American accent

Have it done for you

Record a clear AI voiceover from your script

From £10 for up to 300 words · back in 1 working day

Your script read in a clear British or American synthetic voice, licensed for commercial use, delivered as MP3 at broadcast loudness.